Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
/Page-1212003.png)
The new shift fork can be installed in earlier transmissions.
1st/4th gear shift forks/ball bearings, changes
previous (transmissions up to 05 02 2)
^
dimension a = 20.0 mm
new (transmissions from 06 02 2)
^
dimension a = 21.0 mm
Note
The new shift fork with larger ball bearings can also be installed in earlier transmissions.
Modified 5th gear synchronizer, installed position
Transmissions from 31 10 1
^
assemble hub and synchronizer, as described previously
^
install so that teeth (arrow 1) in synchronizer, and high collar of synchronizer hub (arrow 2) face transmission housing
5th gear, adjusting/checking
Transmissions from 31 10 1
Adjusting
^
engage 5th gear
^
loosen bolt 1
