Corrado V6-2792cc 2.8L DOHC (1992)
-
Enter code number using the first four station buttons.
-
Once the correct code is displayed, press and hold the AM/FM button and the SCAN button simultaneously until the word "SAFE" appears on the
frequency display. Release the buttons and a radio station frequency will be displayed.
If the incorrect code number is entered, the word "SAFE" will appear in the frequency display. A second attempt can be made to enter the proper code
number. The number of attempts is shown in the preset station display. (If the wrong code number is entered again, the radio will electronically lock up
for one hour),
Turn on the radio for approximately one hour. The radio will not play. After the number of attempts shown in the preset station display goes out, the
radio code can be entered.
This cycle will repeat if the incorrect code number is entered two times.
Unlocking A Electronically Locked Radio
After two incorrect attempts at entering the security code, the radio will lock-up electronically. The display shows "SAFE" and will not change.
To unlock:
- Leave radio switched ON for approximately one hour.
- After one hour, reactivate (code) radio as it would be after a power interruption.
Note: The radio will never permanently lock-up no matter how many incorrect coding attempts are made. The reactivation procedure can be repeated
indefinitely.
