Corrado V6-2792cc 2.8L DOHC (1992)
1
Instrument panel
‹› Remove/Install.
‹› Fire remove locking cable from lock housing if applicable.
2
Air intake grill
‹› With water tight seal
‹› Dust and pollen filter not available due to limited space.
3
Air intake grill clamp
4
Air distribution and evaporator housing
‹› Remove together with cables and controls
‹› Install so that cables are not kinked or sharply bent otherwise control knobs will be difficult to turn
5
Fresh Air Blower Series Resistance - N24
6
Fresh air/recirculating flap vacuum servo*
7
A/C evaporator temperature switch - E33
‹› Prevents evaporator from icing up
‹› Switches A/C clutch off at 34° F ± 2° F(1.1° C ± 1° C)
‹› Not needed on vehicles with variable displacement, self regulating compressors (these compressors will not allow evaporator temperatures to
drop below freezing)
8
Fresh air blower V2
9
Right air duct
10
Air distribution duct
‹› to remove: first remove instrument panel
