Corrado V6-2792cc 2.8L DOHC (1992)
Heater Core Case: Service and Repair
Disassembly and Assembly
Heater/Evaporator Housing Disassebly
1
Upper evaporator housing
‹› Seal gooves and contact surfaces with silicone rubber sealant Part No. AKD 476 KD5 05 or equivalent
2
Fresh air blower series resistance with fuse - N24
3
Intake duct
‹› Glue seal to ensure water tight connection
4
Fresh air/recirculation flap vacuum servo
6
Air intake ring
7
Fresh air blower - V2
8
Lower evaporator housing
‹› Seal grooves and contact surfaces with silicone rubber sealant Part No. AKD 476 KD5 05 or equivalent
9
A/C evaporator temperature switch -E33- sensing tube
10 A/C evaporator temperature switch - E33
‹› Insert sensing tube of temperature switch into evaporator 330 mm (13.0 in.)
‹› Replaceable only with cover and insulation
‹› Prevents evaporator from freezing
‹› Not needed on vehicles with variable displacement, self regulating compressors (these compressors will not allow evaporator temperatures to
drop below freezing)