Corrado V6-2792cc 2.8L DOHC (1992)
-
Push heat insulation covering aside at lower fuel hose connection.
-
Remove fuel hose/clamps from fuel feed and fuel return hoses.
-
Use specially designed cutting knife, part number KL2298, and carefully slice each end of both the fuel feed and fuel return hoses open to prepare
hoses for easy removal.
CAUTION:
Be certain not to cut into plastic fuel pipe. Use only the supplied cutting knife.
-
Use special hose clamp pliers, VAG 1819, and push new hose clamps, part number N 102 922 01, on to new fuel hoses, part numbers 021 133
988D and 021 133 990D. Push both clamps toward center of hose.
-
Install both new fuel hoses.
-
Use clamp pliers and move each clamp into position. Clamps must be about 3 mm from end of hose.
-
Re-secure fuel lines.
