Corrado V6-2792cc 2.8L DOHC (1992)
Shift Fork: Technical Service Bulletins
M/T - Changes, Modifications
Group: 35
Number: 92-01
Date: December 31, 1992
Subject:
5-speed transmission 02A, changes/modifications
Models:
Corrado, all m.y.
(see component descriptions below, for specific transmission build dates)
5th gear synchronizer, changes
Transmissions from 31 10 1
Note
The modified assembly has three new locking keys (item 4) which are additional to the three existing keys cast on the synchronizer ring.
1 - Springs for 5th gear synchronizer ring
^
no longer a single-spring design
^
installed position: one spring at 120~ offset to the other
2 - Synchronizer for 5th gear
^
three cutouts (arrows A) for new locking keys (item 4)
3 - Synchronizer hub for 5th gear
^
three smaller additional cutouts a for new locking keys (item 4)
^
dimension a = 8.2 mm
4 - Locking keys
^
installed position: smaller end (arrows B) toward edge of meshing teeth in synchronizer (item 2)
5th gear synchronizer ring, change
