volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Antenna Amplifier|Service and Repair|Page 13557 > < Diagram Information and Instructions|Page 13551
Page 1
background image

Antenna Amplifier: Service and Repair

Antenna Amplifier

Removing

Before starting repair work, perform the following:

-

Switch off ignition, switch off all electrical consumers and remove ignition key.

-

Remove the rear lid trim.

-

Disengage connectors - 1, 2 and 3 - and remove them. 

-

Remove screws - arrows -.

-

Remove antenna amplifier.

Installing

When installing, make sure that antenna connections in the rear lid -  arrows - and bolts on antenna amplifier - arrows - are metallically clean so that
no contact problems occur.

Antenna Amplifier|Service and Repair|Page 13557 > < Diagram Information and Instructions|Page 13551