Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Speaker: Service and Repair
Front Bass
Speakers
Front Bass
‹› Removal and installation of left or right side speakers is identical.
Removing
Before starting repair work, perform the following:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
In order to replace a speaker, first the door trim must be removed.
-
Release locking mechanism of harness connector - 1 - and disconnect it. Remove rubber spacer ring - 2 - from speaker.
-
Using a suitable drill, drill out rivets - arrows - and remove speaker.
‹› To prevent corrosion, ensure that all metal particles from drilling are removed from inside the door.
‹› If paint on door frame is damaged during drilling, touch-up immediately.
Installing
-
When installing, secure new speaker with special pop rivets note replacement part number!