Eos (1F7) L4-2.0L Turbo (BPY) (2007)
^
Remove door trim of the driver/passenger door. See Repair Manual, Group 70 Interior Trim.
^
Remove and install dampers/door and side trim/cover, remove.
^
Remove the caps of the openings for the pinch bolts.
^
Lower the door window till the two pinch bolts (C, D) are accessible through the opening.
^
Tighten pinch bolts (C, D) to 6 Nm (53 in. lbs.).
If one or both pinch bolts can be retightened:
^
Remove pinch bolt(s) separately
^
Clean and apply liquid locking compound (part number: D 000 600 A2)
^
Install bolt tighten to 6 Nm. (53 in.lbs.)
Tighten mounting bolts (E, F) as necessary to 8 Nm (70 in.
lbs.).
^
Remove mounting bolt(s) separately
^
Clean and apply liquid locking compound (part number: D 000 600 A2)
^
Install bolt tighten to 8 Nm (70 in.lbs.).
^
Adjust window(s), see Repair Manual, Group 64 Glass, Window Regulators.
^
Install door trim, see Repair Manual, Group 70 Interior Trim.