Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Installing
-
Perform the steps used for removal in reverse order.
Center Console Cupholder, Highline
Center Console Cupholder, Highline
Removing
-
Open cup holder - 1 - and remove two bolts - 2 - (1.5 Nm).
-
Pull cup holder out of center console.
‹› When installing, cup holder must be inserted (first at bottom) into center console while in a closed state. Then it must be opened and then install
the two bolts - 2 -.