Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Remove side instrument panel cover on driver's side. Refer to => [ Instrument Panel Side Covers ] See: Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Side Covers
-
Remove trim - 1 - upward from mounts in body - arrow A -.
-
Pull trim upward out of lower A-pillar trim - arrow B -.
Installing
‹› Ensure trim is in door seal molding after installation.
-
Perform the steps used for removal in reverse order.
Lower A-Pillar Trim
Lower A-Pillar Trim
‹› Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
Driver side only
-
Remove left side instrument panel cover. Refer to => [ Instrument Panel Side Covers ] See: Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Side Covers
-
Remove hood release lever.