Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Adjust the stop buffer first. Refer to => [ Basic Setting for Newly Installed CSC Roof ] See: Service and Repair/Removal and Replacement/CSC
Roof.
-
Rotate the stop buffer - 1 - 90° and remove it from the rear shelf - 4 -.
-
Clean the area of the rear shelf - 4 - and stop buffer seal - 2 - with cleaner (D 195 850 A1).
Let the cleaner dry until there is no residue remaining.
-
Coat the seal - 2 - with adhesive (AMV 195 KD1 01).
-
Tighten the stop buffer immediately.
Rear Shelf Protective Strip
Rear Shelf Protective Strip
Removing
‹› It is not possible to remove the protective strip without breaking it.