Eos (1F7) L4-2.0L Turbo (BPY) (2007)
^
Carefully apply parking brake.
If vibration IS observed:
Clean all front and rear brake discs.
If vibration IS NOT observed:
Clean only front discs.
Disassembly Inspection
^
Remove wheels, disassemble brake calipers and remove brake disc. See appropriate Repair Manual for vehicle you are servicing.
^
Paint mark or scribe brake discs for reinstallation (Left/Right).
^
Paint mark brake pads for reinstallation (Left/Right, Inner/Outer).
^
Inspect all brake components for damage from outside influences.
^
Using micrometer, measure brake disc thickness. See appropriate Repair Manual in ElsaWeb for minimum brake disc thickness.
Brake Disc Surface Cleaning
Remove remaining corrosion protection coating as follows:
^
Sand brake disc surfaces until clean metal is visible using 40-grit sanding disc in a clockwise direction using leading edge of sanding disc (1-2 minute
per surface).
Replace sanding disc prior to moving to next brake disc surface.
To achieve a crosshatch pattern:
^
Repeat sanding process using 80-grit sanding disc in a clockwise direction using trailing edge of sanding disc.