Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Thermostat: Locations
Bypass thermostat
Bypass thermostat, assembly overview
1. Retaining clip
2. Lower part of housing
3. Operating element
4. Spring
5. O-ring
6. Upper part of housing
Checking bypass thermostat:
-
Remove operating element.
-
Warm operating element in a coolant bath.
Starts to open: approximately 75° C
Opening end: approximately 85° C
Opens: approximately 5 mm
Bypass thermostat location:
Bypass thermostat for coolant circuit transmission oil:
-
Arrow on bottom part of thermostat points to heater unit heat exchanger.
Bypass thermostat for coolant circuit turbocharger:
-
Arrow on bottom part of housing points to Coolant Pump V50.