Eos (1F7) L4-2.0L Turbo (BPY) (2007)
‹› The camshaft adjustment valve 1 as well as the housing must be free of dirt and contaminants.
‹› Remove the new camshaft adjustment valve 1 from its packaging only prior to installation.
CAUTION!
‹› The camshaft adjustment valve 1 must not be subjected to knocks and impacts.
-
Lubricate the seal with engine oil.
-
Carefully install the camshaft adjustment valve 1 into the housing and press it perpendicular to the valve axis in by hand until seated.
-
Tighten the bolts to 4 Nm.
The rest of the installation is basically a reverse of the removal sequence.