Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-1016001.png)
Crankshaft Seal Retainer: Service and Repair
Sealing Flange Overview
Sealing Flange Overview
1
Bolt
‹› 90 Nm + 90° (1/4) additional turn.
2
Crankshaft Toothed Belt Gear
3
Bolt
‹› 15 Nm
4
Seal
‹› Do not additionally oil or grease the sealing lip of the seal.
‹› Replacing, refer to => [ Seal, Belt Pulley Side ] See: Seals and Gaskets/Front Crankshaft Seal/Service and Repair.
5
Sealing Flange, Belt Pulley Side
‹› Must be located on the alignment pins.
‹› Removing and installing, refer to => [ Sealing Flange, Belt Pulley Side ] See: Sealing Flange, Engine Front/Service and Repair/Sealing Flange,
Belt Pulley Side.
‹› To remove and install, remove the oil pan.
