Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Insert a punch - 1 - into the bore in the lower part of the (3364).
-
Using the punch - 1 - as a lever, remove the valve stem oil seal in the - direction of the arrow -.
Installing
-
Place the plastic sleeve - A - on the valve stem to prevent damage to the new valve stem oil seal - B -.
-
Lubricate the sealing lip of the valve stem oil seal - B -, insert it into the (3365) and carefully slide it onto the valve guide.
-
Remove the plastic sleeve - A -.
-
Install the valve spring and valve spring retainer.
-
Install the (VAS 5161) as shown.
Intake Side