Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-1124022.png)
-
Remove the rubber stops - arrows - for the hood.
-
Install the (10-222A) using (10-222A/1 ), as shown, on the fender edges. Support the engine in the installed position.
Continuation for All
CAUTION!
Ensure that the fender edges are not damaged.
-
Remove the upper toothed belt guard bolts - arrows - and remove the upper toothed belt guard.
