Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Tension the toothed belt. To do so, install the wrench on the eccentric and turn it clockwise in the - direction of the arrow - until the notch is
above the tab (toothed belt excessively tensioned).
-
Release the tension on the toothed belt again.
-
Tension the toothed belt until the notch and tab align.
-
Tighten the semi automatic tensioning roller nut to 25 Nm.
-
Rotate the crankshaft two additional turns in engine rotation direction until the engine is again at TDC. For this it is necessary that the last 45°
(1/8) rotation is turned without interruption.
-
Check the toothed belt tension. Target value: tab and notch are positioned across from each other.