Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-1124031.png)
-
Tighten both lower toothed belt guard upper bolts - arrows -.
-
Install the engine mount bracket to the cylinder block and tighten the bolts hand tight.
‹› Note the different length of bolts. Bolt - 3 - is approximately 25 mm shorter than bolts - 1 and 2 -.
‹› Bolt - 1 - can be installed through the hole in the wheel housing and tightened.
