Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-1138003.png)
-
Press switch on the Hand held remote control (jumper).
‹› The Fuel Pump (FP) runs quietly. Avoid surrounding noises while testing the fuel pump.
-
Listen for an operating noise from the fuel pump.
If no operating noise is heard:
-
Remove the fuel delivery unit.
-
Using a Multimeter, check the electrical circuit between terminals - 1 - and - 5 - of the fuel delivery unit and the fuel pump for continuity.
Specified value: 0 ohms.
If a malfunction is detected in the electrical circuit:
-
Check the wiring for a short circuit to Battery positive (+) or an open circuit.
-
Check the electrical harness connector for damage, corrosion, lose or broken terminals.
