Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-1239002.png)
-
Disconnect the connector for the Oxygen Sensor (O2S) behind Three Way Catalytic Converter (TWC) (G130) - arrow - and free up the wire.
‹› The flex joint in the front exhaust pipe must not be bent more than 10 °, otherwise it may be damaged.
-
Disconnect the exhaust system at the clamping sleeve - arrows -.
-
Remove the front crossmember nuts - arrows - and crossmember.
