Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Remove the suspended mount bolts - arrows - from the subframe.
-
Remove the front exhaust pipe with catalytic converter.
Installing
Installation is performed in the reverse order of removal, noting the following:
‹› Lubricate the turbocharger stud bolts with hot bolt paste.
‹› Replace gaskets and self locking nuts.
‹› Install the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] See: Service and Repair/Removal and Replacement/Exhaust
System, Installing.
Tightening Specifications