Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2818025.png)
Left Temperature Door Motor
Removing
-
Remove left footwell vent. Refer to => [ Left Footwell Vent ] See: Air Register/Service and Repair
-
Remove the left footwell trim.
-
Remove Data Bus On Board Diagnostic Interface ( J533).
-
Remove the bolts - 3 - (9 ± 1.3 Nm).
The bolts - 1 - are not to be removed.
-
Push the bracket - 1 - toward the brake pedal - arrow - and secure it there using a cable tie.
