Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Engage harness connector -1- by pressing securing bracket -2- in -direction of arrow-.
NOTE: After installing a new Headlamp Range Control Module J431, it must be coded.
Headlamp Range/Cornering Lamp Control Module J745, coding
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
-
In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Electrical Equipment
-
01 - On Board Diagnostic (OBD) capable systems
-
Automatic Headlamp Range/Cornering Lamp Control
-
Automatic headlamp range control functions
-
Code Control Module for AFS Light Control
NOTE: If Headlamp Range/Cornering Lamp Control Module J745 is coded, basic setting of headlamps must be performed after coding.
Headlamp Range/Cornering Lamp Control Module J745, output diagnostic test mode
The following components and functions can be checked via output Diagnostic Test Mode (DTM) of Comfort System Central Control Module J393 :
-
Left Headlamp Beam Adjustment Motor V48 and Right Headlamp Beam Adjusting Motor V49
-
Left Dynamic Cornering Light Motor V318 or Right Dynamic Cornering Light Motor V319
-
Left Cornering Lamp L148 or Right Cornering Lamp L149
-
Headlamp range control lamp in instrument cluster
-
AFS (Adaptive Front lighting System) lamp in instrument cluster
NOTE: In case of malfunction in automatic headlamp range control and AFS (Adaptive Front Light System) system, "lamp failure" indicator light
comes on in instrument cluster.
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
-
In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Electrical Equipment
-
01 - On Board Diagnostic (OBD) capable systems
-
Automatic Headlamp Range/Cornering Lamp Control
-
Automatic headlamp range control functions
-
Output Diagnostic Test Mode (DTM) of AFS
Adapting Headlamp Range/Cornering Lamp Control Module J745
The "Adapt Headlamp Range/Cornering Lamp Control Module" function was not yet implemented at time of publication.