Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Turn Signal Bulb: Service and Repair
Halogen Headlamps
Halogen Headlamps
Front Turn Signal Bulbs, Valeo
Removing:
CAUTION!
‹› Note usage and safety notes for halogen lamps, refer to => [ Application and Safety Notes: ] See: Headlamp/Service
Precautions/Halogen Headlamps Safety Precautions.
‹› During removal and installation, leave ignition key with remote control inside the vehicle to prevent the doors from locking and possibly activating
the Coming Home / Leaving Home functions on its own.
In order to be able to replace the bulb, it is sometimes necessary to remove neighboring components at the corresponding headlamp.
-
Refer to the following table as to which components are to be removed depending on engine version, in order to replace the bulb.
‹› The following figures show the replacement of the right headlamp bulb.
‹› The left headlamp bulb is replaced is the same way.
-
Disengage retaining bracket - 3 - from housing cover - 1 - and remove housing cover from retainers - arrows -.
-
Rotate lamp socket - 2 - with front turn signal lamp counterclockwise and remove it from reflector.