Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Remove both upper toothed belt guard bolts - arrows - and remove the guard downward from the engine.
-
Remove the engine mount bracket upward from the engine.
-
If reinstalling the toothed belt, mark the rotational direction of the toothed belt.
-
Loosen the semi automatic tensioning roller nut and remove the toothed belt.
-
Then, turn the crankshaft back slightly.
Installing
‹› When turning the camshaft, the crankshaft must not be at TDC. Valves and/or pistons may be damaged.
‹› The engine must be no more than warm to touch.
‹› Tightening specifications, refer to => [ Toothed Belt Overview, With Divided Toothed Belt Guard ] See: Engine, Cooling and
Exhaust/Engine/Cylinder Block Assembly/Service and Repair/Removal and Replacement/Engine Overview.
-
Position the camshaft and crankshaft on the TDC marks.