Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Fuel Injector: Service and Repair
Fuel Injectors
Fuel Injectors
Special tools, testers and auxiliary items required
‹› Tool Set (T10133)
Fuel Injector, Individual Parts
1. Radial compensation (replace)
2. Combustion chamber seal (Teflon seal), replace, the seal must not be greased or handled with any other lubricants when installing.
3. Groove on fuel injector
4. Support washer (replace)
5. O-ring (replace, lightly lubricate with clean engine oil when installing)
6. Support ring
Removing
-
Remove the intake manifold. Refer to => [ Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake
Manifold.
-
Seal the intake passages with a clean cloth.
-
Bend the retaining hooks on the radial compensation to the side using a screwdriver and pull off the support ring from the fuel injector.