Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Fuel Rail: Service and Repair
Fuel Rail
Fuel Rail
Removing
-
Remove the intake manifold. Refer to => [ Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake
Manifold.
-
Disconnect the hose from the Evaporative Emission (EVAP) canister.
-
To do so, remove the hose clamp bolt - 1 -.
-
Loosen the two fuel rail bolts - arrows -.
-
Remove the hose connection - 1 - from the intake manifold and loosen both bolts - arrows -.
-
Loosen the union nuts of both fuel pipes - 2 and 3 -. Counter hold the pressure relief valve when doing this.
-
Carefully pry off the linkage from the intake flap motor (V157) - 4 -.
-
Remove the intake flap motor bolts - 5 -.
-
Remove the fuel rail from the intake manifold.