Eos (1F7) L4-2.0L Turbo (BPY) (2007)
^
Install insulator Part No. 06A141730A around the black fuel line through the oval access hole in the frame channel.
^
Move the insulator forward into frame channel and position as illustrated in picture 20-A203.
Tip:
Move insulator carefully so that it does not slide off of fuel line inside frame channel.
^
Reinstall the foam insulating block at the rear of the frame channel.
^
Install right side under body cover. Tighten fasteners to 2 Nm (20 in. lbs.).
^
Verify noise is eliminated.
Tip:
Contact technical assistance with any questions by selecting the "Technical Assistance" tab in ElsaWeb and follow the instructions to obtain a 6 digit pin.
Warranty
Required Parts and Tools