Eos L4-20L Turbo Intercooler Service and Repair
Intercooler: Service and Repair
Charge Air Cooler
Charge Air Cooler
Removing
-
Drain the coolant. Refer to => [ Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Procedures.
-
Remove the right charge air hose clamps - arrows - and hose.
-
Remove the fan shroud. Refer to => [ Fan Shroud and Fans ] See: Engine, Cooling and Exhaust/Cooling System/Fan Shroud/Service and Repair.
-
Remove the radiator. refer to => [ Radiator ] See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair.
The Air Conditioning (A/C) condenser pipes are bolted to the right side of the charge air cooler. To remove the bolt, proceed as follows:
-
Create a paper template with the specified dimensions.
-
Position the template on the right front plastic support so it aligns with the top and left edges.