Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Variable Induction Position Sensor: Service and Repair
Intake Flap Motor with Intake Manifold Runner Position Sensor
Special tools, testers and auxiliary items required
‹› Assembly Tool (T10118)
‹› Commercially Available 1/4" Reversible Ratchet
‹› T30 TORX Bit
Removing
-
Remove the engine cover/upper air filter housing. Refer to => [ Engine Cover/Upper Air Filter Housing ] See: Air Cleaner Housing/Service and
Repair/Engine Cover/Upper Air Filter Housing.
-
Remove the air guide bolts - arrows - and air guide from the lock carrier.
-
Disconnect the vacuum lines - arrows -.
-
Disconnect the electrical connectors for the following:
‹› It is easier to release the connectors that are hard to access when using (T10118).
‹› Intake flap motor (V157)
‹› Evaporative Emission (EVAP) canister purge regulator valve (N80)