Eos (1F7) L4-2.0L Turbo (BPY) (2007)
‹› Manifold Absolute Pressure (MAP) sensor (G71)
‹› Throttle valve control module (J338)
‹› Low fuel pressure sensor (G410)
-
Disconnect the connectors - arrows -.
-
Loosen the wiring bracket - A - and move the wiring harness to the side.
-
Remove the connector bracket - arrows - from the coolant pipe.
‹› Loosen the nut - left arrow - just enough so that the bracket can be moved to the side.
‹› A plastic bracket is clipped in.
‹› To improve clarity, the intake manifold is shown removed, in the illustration.
-
Pry the coupling rod - arrow - off the intake flap motor.