Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Disengage catches in -direction of arrow- and pull thermo-fuses -1- out of mounts.
-
Release retaining tab -1- in - direction of arrow A - and pull off mount from relay carrier in - direction of arrow C -.
-
Release retaining tab -2- in - direction of arrow B - and pull off mount from relay carrier in - direction of arrow C -.
-
Release retainer -1- for relay panel in direction of -arrow- and remove relay panel.
Installing:
Install in reverse order of removal, noting the following:
-
First clip connector (for relay), holder (for fuse) and mounts (for thermo-fuses) into relay carrier.
-
Place relay carrier -2- into guide -1- and then engage relay carrier.