Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Remove nuts - arrows - (4.5 Nm).
-
Remove bracket with comfort system central control module - 1 -.
-
Pull retaining tab - 1 - in - direction of arrow B - and slide comfort system central control module - 2 - out of bracket - 3 - in - direction of
arrow A -.
Installing:
Install in reverse order of removal, noting the following:
-
Tighten the nuts to tightening specification. Refer to => [ Comfort System Central Control Module Tightening Specifications ] See: Specifications.
‹› The connectors can only be connected and locked when the recesses - arrows - of the connectors and bracket line up exactly.