Eos (1F7) L4-2.0L Turbo (BPY) (2007)
If indication jumps to approx. 140° C:
-
End diagnosis and switch ignition off.
-
Replace the Intake Air Temperature (IAT) Sensor ( G42).
If indication remains at approx. -40° C or -46° C:
°Testing if display approx. 140 C:
-
Disconnect the Intake Air Temperature (IAT) Sensor (G42) electrical harness connector - arrow -.
If indication jumps to approx. -40° C or -46° C:
-
End diagnosis and switch ignition off.
-
Replace the Intake Air Temperature (IAT) Sensor ( G42).
If the indication remains at approx. 140° C:
Checking wiring
Add as a workstep to the procedure where required.
If the manufacturers test box is being used. Perform the following step.
-
Install the Test Box 105 Pin (VAG1598/42).
If the manufacturers test box is not being used. Perform the following step.