Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Front Level Control System Sensor Assembly Overview
Front Level Control System Sensor Assembly Overview
‹› A replacement front left and right level control system sensor (G78/G289) comes complete with the coupling rod and the upper and lower
retaining plate.
‹› Replace with subframe installed.
1
Subframe
2
Bolt
‹› M6 x 16
‹› 9 Nm
3
Left Front Level Control System Sensor (G78) and Right Front Level Control Sensor (G289)
‹› Complete with components.
‹› Lever - arrow - must point toward vehicle exterior.
‹› Removing and installing, refer to => [ Front Level Control System Sensor ] See: Front Level Control System Sensor.
‹› If the left front level control system sensor and the right front level control sensor were removed and installed, then a basic setting to the
adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] See: Steering and
Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Testing and Inspection/Programming and Relearning.
‹› After replacing, perform basic setting of the headlamps via the Guided Fault Finding function with the Vehicle Diagnosis, Testing, and