Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Acceleration Sensor: Service and Repair
Right Front Body Acceleration Sensor
Right Front Body Acceleration Sensor
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1410)
Removing
-
Remove wiper arms.
-
Remove plenum chamber cover.
-
Release and disconnect the connector.
-
Remove the nuts and remove the right front body acceleration sensor (G342).
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
CAUTION!
The front body acceleration sensors must never be interchanged with the rear body acceleration sensors.
-
Be sure to pay attention to the installation position of the right front body acceleration sensor retainer.