Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Front Strut / Shock Tower: Overhaul
Suspension Strut
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
‹› Spring compressor (V.A.G 1752/1)
‹› Spring holder (V.A.G 1752/4)
‹› Holding fixture for suspension struts (V.A.G 1752/20 )
‹› Shock absorber set (T10001)
‹› Ratchet (commercially available)
-
Remove suspension strut. Refer to => [ Removing ] See: Removal and Replacement/Front Suspension/Suspension Strut.
Coil Spring, Removing
-
Tension the (V.A.G 1752/20) - 4 - in a vice.
-
Tension the suspension strut in the (V.A.G 1752/20) - 4 -.
-
Pretension the coil spring using the (V.A.G 1752/1) until the upper axial groove ball bearing is free.
1. (V.A.G 1332)
2. Ring spanner insert AF 21 (T10001/8)
3. (V.A.G 1752/1)
4. (V.A.G 1752/20)
5. (V.A.G 1752/4)