Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Mount the retainer on the shock absorber mount from the rear, so that the retainer tabs - 1 - fit into the depressions on the shock absorber mount.
-
Turn the retainer forward so that it contact the shock absorber mount.
The tab - arrow - is used for adjusting the rear body acceleration sensor retainer.
Continuation for Both Sides
-
Install the shock absorber and tighten the bolts.
-
Tighten bolt - arrow -.
-
Connect the connector to the left and right rear dampening adjustment valve (N338/N339).
-
Install coil spring. Refer to => [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Removal and Replacement/Coil Spring.
For the Left Shock Absorber Only
-
Connect the left rear level control system sensor to lower transverse link.