Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Clutch Release Bearing: Procedures
Assembly overview 02Q, 6 Speed M/T
1 -
Transmission
2 -
Input shaft seal
3 -
Slave cylinder with release bearing
^
Are one unit and can only be replaced together
^
Do not wash-out bearing, only wipe off
^
If bearing is noisy, replace together with slave cylinder
^
Divided supply line on some slave cylinders
4 -
Bolt
^
Qty. 3
^
Always replace
^
For metal slave cylinder, 12 Nm
^
For plastic slave cylinder, 15 Nm
^
Carefully tighten diagonally in small stages so that slave cylinder bolting eyelets do not break off
5 -
O-ring
^
Always replace
^
Pull onto line connection
^
Install with brake fluid