Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2034003.png)
-
Remove the slave cylinder bolts - arrows -.
-
Remove slave cylinder with release bearing - A -.
Installing
Install in reverse sequence; note the following points:
‹› Slave cylinder bolts may only be tightened in small increments.
Otherwise, there is a danger that the bolt hole tabs could break off.
-
Install the clutch slave cylinder with release bearing bolts - item 4 -=> [ Bolt ] See: Clutch Release Mechanism Overview.
-
Check the O-ring - 3 - on the clutch slave cylinder.
