Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2077002.png)
Installing
-
Drive the new seal in until seated; be sure not to distort the seal.
-
Fill the area between the sealing lip and dust lip halfway with sealing grease (G 052 128 A1).
-
Install the flange shaft.
-
Secure the flange shaft with the countersunk bolt - item 12 -=> [ Countersunk Bolt ] See: Differential/Differential Output Shaft/Service and
Repair/Overhaul/Differential and tighten to specification.
-
Install left drive axle.
