Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2107003.png)
‹› The relay lever is removed
-
Position a flat head screwdriver - A - between the bushing - B - and the relay lever.
Press on the Cable Retainer
‹› The relay lever is removed
‹› The cable retainer may only be pressed on at the bushing - arrow -.
‹› The cable retainer must move freely on the relay lever.
‹› It must be behind the tab - arrow 2 -.
