Eos (1F7) L4-2.0L Turbo (BPY) (2007)
‹› Bend open the tabs to remove.
‹› Always replace
2
Gasket
‹› Always replace
3
Shift Lever
‹› Can be removed and installed with the shift lever guide - item 15 - installed.
4
Damping Washer
‹› Slide out of the shift lever as far as the stop - arrow -.
5
Retaining Washer
‹› Do not damage the cables when removing.
‹› Always replace
6
Selector Cable
‹› Pry off of the selector bracket.
‹› Press onto the selector bracket inside the shift mechanism.
‹› Installed positions, refer to => [ Shift and Selector Cables, Installed Positions ] See: Shift Linkage/Shift Cable/Service and Repair/02Q
Transmission.
7
Bushing
8
Shift Cable
‹› Pry off of the shift lever guide.
‹› Press onto the shift lever guide inside the shift mechanism.
‹› Installed position, refer to => [ Shift and Selector Cables, Installed Positions ] See: Shift Linkage/Shift Cable/Service and Repair/02Q
Transmission.
9
Damper
10
Bearing Shell
‹› Is damaged during removal.
‹› Always replace
11
Bushing
12
Retaining Washer
13
Spring
14
Bushing
15
Shift Lever Guide
16
Nut
‹› M6 = 8 Nm
‹› M8 = 25 Nm