Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2106018.png)
-
Remove the noise insulation - arrow 2 -.
Installing
-
Install the noise insulation.
Noise Insulation, Installed Position:
The arrow - A - is pointing in driving direction.
The notches - B arrows - must engage in the center console.
-
Press the frame into the center console.
-
Turn the inner side of the boot toward the outside.
The shift knob must be pressed on as far as the stop.
-
Install the shift knob and boot and squeeze the new clamp together - arrow -.
