Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2106020.png)
-
Remove the entire air filter housing, if it is located over the shift mechanism.
-
Remove the shift cable lock washer - 3 - from the transmission selector lever - 1 -.
-
Remove the shift cable from the pin - arrow -.
Metal Relay Lever
-
Remove the retaining washer - 4 - for the selector cable from the relay lever - 2 -.
-
Remove the selector cable from the pin - arrow -.
Plastic Relay Lever
Disconnecting the Cable Retainer from the Selector Cable
