Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Power Window Safety Switch: Service and Repair
Drivers Interior Locking Button E308, Removing And Installing
NOTE: Interior Lock Switch Illumination L99 and Drivers Interior Locking Indicator Lamp K174, which cannot be replaced separately, are integrated
in Drivers Interior Locking Button E308.
Removing:
-
Turn off the ignition and all electrical components.
-
Remove drivers side door trim.
-
Disconnect electrical connection -1-.
-
Disengage retaining tabs -arrows- and remove interior locking switch from installation frame.
Installing:
Install in reverse order of removal.