Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Trunk / Liftgate Stop: Adjustments
Rear Lid
Adjustment Buffer, Adjusting
‹› The following adjustment is only for the right adjusting buffer. Adjustment for the left adjusting buffer is derived accordingly from this.
‹› A new adjusting buffer is delivered locked.
-
Press the adjusting buffer - 1 - together - arrow a - and turn it 45° - arrow b -.
-
Loosen clamping screw - 2 - far enough until it is visible in rubber buffer.
-
Now pull the adjusting buffer - 1 - out slightly.
‹› Lock carrier cover - 3 - is installed.
-
Close rear lid - 2 -.
Adjustment buffer adjusts itself automatically.
-
Open rear lid again.