Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Scuff Plate: Service and Repair
Sill Panel Trim
‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
-
Remove seat bench. Refer to => [ Bench Seat ] See: Seats/Service and Repair/Removal and Replacement/Rear Seats.
-
Remove side trim. Refer to => [ Side Trim ] See: Trim Panel/Service and Repair/Side Trim
-
Remove sill panel molding - 1 - from catches in sill.
Installing
‹› Before installing, check securing elements for damage and replace if necessary.
-
Perform the steps used for removal in reverse order.
-
Check whether sill panel strip is located in the door seal molding.